How to find the exact engine code you need
Displacement and model year are not enough to buy the right used engine. Where to find the engine code on GM, Ford, Stellantis, Toyota and Honda vehicles, and why it matters.
Most bad used-engine purchases start with a search for the displacement. "5.3 engine" covers at least six different GM engines built over twenty years, with different blocks, cylinder heads, fuel systems and computers. The same goes for "5.7 Hemi" (truck, SUV and car versions), "3.5 V6" (Toyota, Honda, Ford and Nissan all make one) and "5.0" (Ford has sold three unrelated 5.0s).
What you want is the engine code. Every listing worth trusting includes it, and every price on this site is grouped by it.
Where to find the code
| Maker | Fastest place to look | What it looks like |
|---|---|---|
| GM (Chevy, GMC, Cadillac) | Service Parts Identification label in the glovebox or on the inside of the console lid | Three-character RPO codes, e.g. L83, L84, LC9, LMG. The engine is one of them. |
| Ford, Lincoln | 8th character of the VIN; the emissions label under the hood | A single VIN letter or digit for each engine; the label names the engine family and displacement. |
| Ram, Jeep, Dodge, Chrysler | 8th character of the VIN; build sheet from a dealer | VIN letter for the engine; the build sheet lists the engine's three-letter sales code. |
| Toyota, Lexus | Stamped on the block; also on many parts catalogs by VIN | Codes like 2GR-FE, 1GR-FE, 3UR-FE, 2AZ-FE. |
| Honda, Acura | Stamped on the block near the transmission | Family plus suffix, e.g. J35A6, K24Z3. The suffix matters. |
| Nissan, Infiniti | Stamped on the block; VIN decode | VQ35DE, VQ35HR, QR25DE and so on. |
If you only have the VIN, NHTSA's free decoder (vPIC) will usually return the displacement and engine family, and a dealer parts counter can pull the exact code from the build record. Both are free.
Why the year is not enough
Model years and engine generations do not line up neatly. For 2014, the new Silverado 1500 got the Gen V L83 while the 2014 Tahoe and Suburban kept the older Gen IV 5.3, and Ford's Coyote changed internally in 2015, 2018 and 2021 without changing its name. Two engines that look identical in a photo can need a different computer, fuel pump, wiring harness or oil pan.
The safe order is: find your engine code, find listings with the same code, then confirm with the seller using the donor vehicle's VIN. A good seller will give you the VIN without being asked twice.
The 5.3 as an example
| Codes | Generation | Years (trucks) | What changes |
|---|---|---|---|
| LM7 (and L59 FlexFuel) | Gen III | 1999–2007 | Iron block, no cylinder deactivation |
| LY5, LMG, LC9, LH6, LH9 | Gen IV | about 2005–2014 | Iron or aluminum block; most have Active Fuel Management (AFM) |
| L83 | Gen V | 2014–2019 | Direct injection, new computer and fuel system, AFM |
| L84 | Gen V | 2019 on | Dynamic Fuel Management (many more deactivating lifters) |
A Gen V engine will not run in a Gen IV truck by just bolting it in, and the AFM and DFM engines have the lifter problems that the older LM7 never had. That is why the engine table prices each code on its own.
Transmissions work the same way
Use the code on the transmission's ID tag or the RPO list (GM), and check two-wheel versus four-wheel drive: the cases and output shafts differ. A 4L60E from a two-wheel-drive Tahoe will not bolt to a four-wheel-drive transfer case.